Screen Printers

New Premier Bench Printer

  • The rotary bench printer is built for quality printing and expandability.
  • Aluminum cast components
  • True all heads down printer
  • Micro registration
  • Sequential lift
New Premier Rotary Printer

 

  • The Industry's most advanced manual rotary printing press.
  • Expandable from 1-6 colors & 1-6 stations
  • Standard Micro-Registration
  • Fast and easy cleanup
  • Gas lifts, NO SPRINGS!
  • Full one-year warranty

Screen Printing Equipment

King Pin Registration System

 

The King Pin Registration System is the ideal tool for multi-color jobs.

  • 100% compatible with Reten Frames
Reten Retensionable Frames

 

Self tensioning aluminum frames.  The most trouble free in the industry.

  • Increase mesh life up to 7 times
  • Reduce ink consumption by 20%
  • Square side bars won't let Retens warp!
  • Get consistent, controllable, mesh tension
  • High print quality with no thread distortion
HIX Portable Washout Booth

 

Leak proof fiberglass mold with backlight to improve stencil washout.

  • No seams, no cracks, no edges, and no leaks
  • Standard with back light
  • 1" drain & flexible 1" hose for easy hook up to drain system
  • Welded aluminum frame construction
  • No tools required for assembly
  • Chemical resistant
  • Splashless front
  • Booth dimensions - 40" x 45" x 27"
  • Booth Stand Size - 21" x 27"
  • Max Screen Size - 29" x 37"
SD-2632 Screen Dryer Cabinet

 

Dries 8 screens in a heated, light proof, dust free environment.

  • Innovative angle rack system, with self-leveling configuration eliminates movable parts.
  • Filtered air prevents pin holes
  • Slotted air knives provide even heated air to every frame
  • Door seals prevent light from entering and air from escaping
  • Separate fan & heat switch
  • Galvanized interior resists rusting.
  • Durable table top work surface
  • Innovative (angle bar rack system) self-leveling
  • Holds eight screens up to 26" x 32"
  • Thermostat
  • Filtered air
  • Operates with or without heat
  • One year warranty

Exposure Units

Halux 1200 Point Source Exposure Unit

 

Point source exposure for precision fine line and halftone graphics.

  • Holds fine lines, dots, and better halftones
  • Provides accurate exposure
  • Warms up in under 1 minute
  • No Assembly Required
TT-180 Table Top Exposure Unit

 

The TT180 is a great fit for small shops that perform spot color printing where detail is not a major concern.  Depending on the sensitivity of the emulsion you use, you can still get fast exposures with the bar lighting system consisting of six high output actinic UV lamps.  Light scatter has always been an issue with bar lighting systems, but the deep draw blanket powered by a 115 volt vacuum pump holds art and screen so tight that any undercutting by light is held to a bare minimum.  The digital timer and auto-shut off are standard on this unit which will hold screens up to 25" x 31".  Light and compact, this unit can be moved easily in any dynamic work situation.

TT-180E Table Top Exposure Unit 
 The TT-180E is a great fit for small shops that perform spot color printing.  Depending on the sensitivity of the emulsion you use, you can still get fast exposures with the bar lighting system consisting of six high output fluorescent aqua-coral UV lamps.  The compression foam and special design lid holds art and screen so tight that any undercutting by light is held to a bare minimum.  The digital timer and auto-shut off are standard on this unit which will hold screens up to 25" x 31".  Light and compact, this unit can be moved easily in any dynamic work situation.

The TT-180E gives the shop owner the same great performance of the TT-180 but at a lower cost.  Simply place your screen face down on light surface, place appropriate size compression foam on middle of screen, close lid and begin exposure.